|
Premium DVI cable for extended distances!
LINDY Super Long Distance cables use a specially
developed and optimised cable material that allows longer cable
distances than the 7.5m maximum recommendation laid down by the DDWG
(Digital Display Working Group).
- DVI-D Single Link Cable
- For use with all modern digital monitors, projectors and TFT/LCD Flat Panel Displays
- XGA (1024 x 768) and HDTV 720i (1280 x 720) compatible
- Patent pending, RF-BLOK shielded design
- Connectors: DVI-D Single Link Male to DVI-D Single Link Male
- 10 Year Warranty
Further Information
Please note: Maximum supported distances and
resolutions are dependent on both the monitor and the chipset used in
the graphics card. The following example shows the maximum values from
a test with a Belinea 1280 x 1024 DVI flat panel display and two
different graphics cards (ATI Radeon 7000 and NVidea 5200).
As a general rule, the newer the hardware used, the longer the distance and the higher the supported resolution.
|
LINDY SLD cable length
|
Max. resolution using a
2004 Belinea TFT
(1280 x 1024 native resolution)
|
Max. resolution using a
2006 Dell TFT
(1920 x 1200 native resolution)
|
|
20m
|
1280 x 1024 @ 60Hz
|
1920 x 1200 @ 60Hz
|
|
25m
|
1024 x 768 @ 60Hz
|
1600 x 1200 @ 60Hz
|
Please click here for our DVI Guide.
Features of the RF-BLOK shielded design:
- Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
- Increased insulation resistance up to 25%
- No soldering requirements as interconnect design needs no 360
degree soldering - eliminating the possibility of human error and/or
cracking of the solder that causes grounding intermittence and the use
of the most hazardous waste material - soldering flux
- Tight fit of internal wires as there is no inner mould
- No requirement of ferrite cores as signal loss and degradation are
greatly reduced giving enhanced signal sharpness. Without the ferrite
cores the cable is less stressed and more flexible
- Smaller overall dimensions which allows more room behind the host or peripheral
- Increased connector and mating strength - the 4 point reinforcement
tabs on the RF-BLOK, attached to the connector, strengthens the pair as
one
|
