Wall Mounting LCD / TFT Mount with Tilt BT7511

£26.99

Wall Mounting LCD / TFT Mount with Tilt BT7511

Click to enlarge

In order to obtain the correct bracket for your LCD we operate by the hole spacing on the rear of the screen. We do not have a model fit list. These holes of which there can be 4 or 6 may OR may not conform to the VESA standards of 75mm, 100mm or 200mm square or 200 x 100mm (6 holes in two banks of 3 100mm apart). The larger screens where the hole spacing is greater than 200mm may require the BT7505 adaptor or can be mounted on the hook on ' LCD and Plasma Brackets.

The VESA fitting is an industry standard namely Flat Panel Physical Mounting Interface ( FPMPMI ).
Manufacturers of flat screens include the VESA hole pattern on the back of their displays for mounting purposes.
A VESA hole pattern for small screens can be of two sizes :
75 x75 mm or 100 x 100mm . The BT7511 can accept both sizes .

Please Note : To enable this bracket to used with screens with fixing holes with a spacing of 100 x 200mm ( 6 Holes 100mm apart ) an additional adaptor BT7506 will be required . For screens with fixing holes of 200mm x 200mm the adaptor BT7502 will be required .

Suitable for LCD/TFT Screens upto 23" (53cms) and 20Kgs
Available in Silver only
Distance from wall to LCD Fixing Face 60mm
Supplied with both VESA standard fixings
Metal construction
Unique security locking screw provided
Simple installation , all fixings included.

BT7511 Wall Mount with Tilt

The picture shows the bracket and VESA fittings :
Tilt 17° ( Up and Down )
Unique security locking screw provided
Simple installation , all fixings included.

This product was added to our catalog on Thursday 13 July, 2006.

Sunday 20 July, 2008	6594856 requests since Wednesday 03 March, 2004
site map \| Shipping & Returns \| Privacy Notice \| About Us and Our Products \| Contact Us