Wall Mounting LCD /TFT Mount with Tilt & Swivel BT7512

£36.99

Wall Mounting LCD /TFT Mount with Tilt & Swivel BT7512

Click to enlarge

In order to obtain the correct bracket for your LCD we operate by the hole spacing on the rear of the screen. We do not have a model fit list. These holes of which there can be 4 or 6 may OR may not conform to the VESA standards of 75mm, 100mm or 200mm square or 200 x 100mm (6 holes in two banks of 3 100mm apart). The larger screens where the hole spacing is greater than 200mm may require the BT7505 adaptor or can be mounted on the hook on ' LCD and Plasma Brackets.

The VESA fitting is an industry standard namely Flat Panel Physical Mounting Interface ( FPMPMI ).Manufacturers of flat screens include the VESA hole pattern on the back of their displays for mounting purposes.

A VESA hole pattern for small screens can be of two sizes :75 x75 mm or 100 x 100mm .
The BT7512 includes adaptors for both sizes .

Please Note : To enable this bracket to used with screens with fixing holes with a spacing of 100 x 200mm ( 6 Holes 100mm apart ) an additional adaptor BT7506 will be required . For screens with fixing holes of 200mm x 200mm the adaptor BT7502 will be required .

Chrome Version Shown Below

Suitable for LCD/TFT Screens upto 23" and 15Kgs
Metal construction
This mount allows the screen to be mounted either flat to the wall , or extended up to 280mm ( 11" ) from the wall.
Available in Silver or Chrome
The BT7512 can swivel 180° at the wall and 240° at the end of the arm.
Tilt 17° up and down
Supplied with both VESA standard fixings
Simple installation , all fixings included.

This product was added to our catalog on Thursday 13 July, 2006.

Monday 21 July, 2008	6595343 requests since Wednesday 03 March, 2004
site map \| Shipping & Returns \| Privacy Notice \| About Us and Our Products \| Contact Us